M&H 6090 Stage V Emissions Hazardous Area Engine
(205 kW (275 HP) @ 2200 RPM – 317 kW (425 HP) @ 2000 - 2200 RPM)
Emissions reductions from Stage 1 to M&H Stage V
Based on 130 to 560 kW NRMM engine power output range
Specifications
I-6, 4-Stroke-Cycle-Diesel
Emissions – Stage V / IMO lll / BSO / CH VASm
Weight, Net Dry (approx) – 1,097 kg (2,418 lb)
Oil Change Interval – 500 hr
Rotation (from flywheel end) – Counterclockwise
Flywheel and flywheel housing – SAE options available
Max. Exhaust Backpressure – 27.0 kPa (109 in. water)
Fuel Consumption – 214 g/kWh (0.352 lb/hp-hr)
Rated Power – 317 kW - 425 hp
Rated Speed – 2200 rpm
Peak Torque Speed – 1600 rpm
Rated Torque – 1,376 N·m - 1018 lb-ft
BMEP Rated – 1,925 kPa - 279 psi
Noise @ 1 m dB(A) – 98
Performance Data 317 kW (425 HP) @ 2200 RPM
| Air Inlet System | Corrosion resistant aftercooler core, light - duty air cleaner |
| Cooling System | Gear-driven jacket water pump |
| Inlet Air System | Inlet shut down valve and flame trap to comply with hazardous standards |
| Gas Detector | Inlet air system fitted with gas detector |
| Exhaust System | Fully thermal protected exhaust manifold, turbocharger and after treatment system |
| Exhaust Gas Cooler | Fully protected exhaust gas cooler to meet T3 surface and exhaust gas temperatures |
| Spark Arrestor | Spark arrestor to meet hazardous area standards |
| Protection System | Complete exhaust system, turbochargers and after treatment system fully protected to meet T3 surface temperature requirements |
| Aftertreatment | DOC / DPF / SCR |
| Fuel System | Fuel priming pump, fuel transfer pump, fuel filter — RH or LH service, flexible fuel lines |
| Lube System | Crankcase breather, engine oil cooler, oil filter — RH or LH service, oil dipstick — RH or LH option, oil filler, deep sump oil pan, gear-driven oil pump |
| Instrumentation | 12V / 24V instrument panel. |
| Protection System | 12 or 24V electronic shutdown |
| Control System | Fully integrated control system for engine and hazardous area shut down requirements. This can also be fully configured to provide complete package control and remote monitoring if required. |
Stage V Engine Physical Data 6090
| Engine Model (Stage V) | Aftertreatment Location | Total Weight Kgs (lbs) | Length (A) mm (ins) | Width (B) mm (ins) | Height (C) mm (ins) |
| 6068 | Rear | 1395 (3076) | 2600 (103) | 960 (38) | 1466 (58) |
Note: All dimensions and weights given in the above table and in the engine data sheets are indicative only. Definitive dimensions and weights will be confirmed at order placement.
Stage V Complete System Physical Data 6090
| Engine Model (Stage V) | Exhaust Gas Cooler Location | Total Weight Kgs (lbs) | Length (A) mm (ins) | Width (B) mm (ins) | Height (C) mm (ins) |
| 4045 | Side | 1725 (3802) | 2600 (103) | 1440 (56) | 1466 (58) |
Note: All dimensions and weights given in the above table and in the engine data sheets are indicative only. Definitive dimensions and weights will be confirmed at order placement.
M&H Stage V Hazardous Area Engines Features and Benefits
Complete System
The engine will be supplied as a packaged system with the relevant additional parts including exhaust gas cooler, inlet shut down valve, inlet flame trap, etc.
The complete system has been designed and developed with our partners, who are specialists in hazardous protection systems, which ensures a fully integrated and optimized system.
As we are supplying a complete system, it provides the customer with a complete solution for them to finish package.
Accreditation
Warranty
Service and support
Oil change
500 hours standard oil change intervals. Additional high specification filtration systems can be fitted to extend oil change intervals to up to 1,000 hours.
Either-side Service
Engine Jacket Water Circuit cooling
Suitable for radiator cooling. Combined engine jacket water circuit and exhaust gas cooler water circuit pump.
Exhaust after treatment for Stage V units.
M&H Engineering engines use EGR, DPF, DOC and SCR exhaust systems to meet the Stage V emission legislation requirements.